8
Engine Starting
Warning:Never start the engine in a closed
place
or
warehouse
or
warehouse
as the
exhausted gas from the vehicle contains toxic
carbon monox ide.
1.Set the key of the ignition switch to
“ON”position.
2.Ascertain the neutral position ,where it
should be displayed.
3.Ascertain the amount of fuel in the tank,
4.Set the fuel cock handle to “ON”position.
★
To start a cold engine;
1.Pull up the choke bar of the carburetor(to
close the choke).
2.Rotate the throttle twist grip by 1/8to
1/4turn.
3.Start the engine by the electric or the kick
starting system.
4.Slightly turn the throttle twist grip to
increase the speed of the engine so as to
warm up the engine.
5.Turn the carburetor choke bar downward
to fully open the choke when the engine is
sufficiently warmed up.
★
Caution:
The engine can only be started after the
neutral position is ascertained.Otherwise
accident will happen.
Unnecessary id le running(especia lly at a
high speed) is harmful to the engine.
★
Procedures for stopping the engine:
1.Release the throttle twist grip to slow
down the engine.
2.Turn to the neutral position.
3.Set
the
ignition
switch
key to
“OFF”position.
4.Set the fuel cockhandle to “OFF”
position.
Switches on Right Handle bar
