KINTECH ENGINEERING
ORBIT 360 | USER GUIDE
32
If the data logger has internal emergency battery, this should also be disconnected or
the keys combination pressed as shown in the data logger display when the battery
power gets disconnected.
Just after the logger is turned on, the time and date of the recordings will be the one
maintained by the internal RTC. Eventually that time and date will be updated as soon
as the Orbit’s GPS syncs once again.
4.2.6
Internal tilt sensor
The .txt report shows the tilt of the data logger, allowing for detecting met mast
collapses. Provided the usual logger installation inside the cabinet, a 90º value means
that the met mast is still standing.
4.3
Component map
Fig. 5.
Orbit 360 component map
