KINTECH ENGINEERING
ORBIT 360 | USER GUIDE
65
Fig. 15.
GSM antenna
Fig. 16.
GPS antenna
The antennas must be connected to their corresponding logger connectors, located in
the upper right corner of the terminals side of the case (Fig. 17).
Fig. 17.
Antenna connectors in Orbit 360
Both antennas must be installed out of the shelter box, in vertical position and as far as
possible from the tower structure to minimize signal attenuation.
6.5
Sensor connection
The Orbit 360 features 92 removable terminals, arranged in such way that cluttered
cable connection is avoided.
Different sensors produce different types of signal outputs. For your data logger to
interpret the sensor signal, the signal output from the sensor must be compatible with
the data logger input terminal to which it is connected. Depending on the Orbit 360
