KINTECH ENGINEERING
ORBIT 360 | USER GUIDE
104
If you want the logger to continue storing the data at the memory address where it was
left, just do not follow the keypad sequence. The logger will then keep going the
previous storage cycle and the old data will be kept in the SD card, available for future
downloads.
Fig. 56.
Display: old storage cycle continues
8
Data security
There are three different passwords when working with Orbit 360 data loggers:
1. Full access password: with this password, the user can perform all types of
communication with the data logger (real time connection, remote data download,
upload new configurations to the logger, etc.).
2. Real time data password: on a second level, the real time data password locks this
type of connections. It must be noted that the full access password does not restrict real
time connections, with the purpose of allowing the installer or maintenance teams
verify any on-site operations carried out at the met station. It is necessary to firstly set
up the Full access password for the Real time password to function.
3. Data password: Atlas allows embedding a password to the raw data (.log files) before
sending them to a trusted third party. The third party will need to manually input the
password when decoding the received raw data files.