K-FORCE manual
14
Get Started
Before using it for the first time, you must install the cushion provided. The cushion can be very easily installed
thanks to the Velcro material on both surfaces.
Next, configure the strap length according to your hand and place it over it. Otherwise, you can attach K-
FORCE muscle controller on any flat surface for special exercising.
The cushion can be removed for cleaning. Use antiseptic alcohol wipes to
disinfect the cushion prior to use
.
On one part of the device you'll notice a micro-USB port used for charging, 1 LED for the charging state, 1 LED
for the working state and one push-button.
To change the grip, bring the plastic tab toward you and slide the plastic piece out of the muscle controller.
Drag it in the desired direction until the tab comes back to lock.
You can charge your Muscle Controller device through the micro-USB cable provided or with any other regular
micro-USB charging cable. You may have a charger already; many new mobile phones and other mobile
products come with an IEC 60950 compliant USB charger.
While charging, a blue LED is on. Once the charging is completed, the LED turns white.
To turn on K-FORCE Muscle Controller, press the push-button. You'll notice a green flashing LED. Your Muscle
Controller is on! Your Muscle Controller will turn off after 3 minutes of inactivity.
Once the device is turned on, select the Muscle Controller Device in the Home Page. Select the body part you
want to exercise and then select one of the proposed exercises.
While your device is connecting, don't load the device, don't step on the device, don't move the device and
don't put force on the device.
Figure 6, Leg Exercises with K-FORCE muscle Controller
Adjustable straps
USB Plug & LEDs
Removable & washable silicon
cushion
Power button
Handle direction
modification
