7
-2
Mec 2230sW
1. park the vehicle on level ground
and apply the parking brake firmly.
2. stop the engine and let the engine
cooled down sufficiently.
3. raise the cargo bed and support it
with the support rod.
ChECkING AND ChANGING GEARBoX oIl (s)
(1) filler plug
4. clean around filler plug, then re-
move the filler plug.
5. check that the gearbox surface is
not hot. then, check the oil level
and condition with a finger bent
slightly. if you cannot reach the oil,
it means the oil level is low. add oil
as needed to fill.
6. if the color or viscosity of the oil is
not normal or it is at the oil change
interval, change the oil.
(1) Drain plug
7. to change oil, place a container
with wide opening under the drain
plug. then, remove the drain plug.
8. after draining all the oil, install the
drain plug firmly.
9. When adding new oil, add it
through a long hose into the fill
plug location. fill till oil starts to
spill out of filler plug hole.
UUVo734A
UUVo735A
UD130(MEC2230SW)-유럽향-07.indd 26
2015-10-28 오후 12:01:55
Summary of Contents for MEC 2230SW
Page 112: ...MEMO MEMO UD130 MEC2230SW 05 indd 28 2015 10 28 4 46 44...
Page 116: ...MEMO MEMO UD130 MEC2230SW 06 indd 4 2013 12 18 7 16 00...
Page 165: ...TROUBLESHOOTING vehicle Troubleshooting 9 2 9 9 UD130 MEC2230SW 09 indd 1 2013 12 18 7 25 06...
Page 173: ...10 INDEX index 10 2 10 UD130 MEC2230SW 10 indd 1 2015 10 28 11 54 16...
