Kioti PX1002 Owner'S Manual Download

Page: 196 / 223

MainTenance

when wiping the windshield,

set the wiper blade upright,

spray water onto the glass

with a hose, and wipe the

glass with clean cloth.

If the wiper blade is frozen to

the glass in a cold weather

or there is not washer fluid,

never operate the wiper.
In order to prevent damage

of the wiper blade, never use

synthetic detergent, thinner or

solvent on the windshield.

•

CAUTION

fuses protect the tractor electrical

system from potential damage. a

blown fuse indicates that there is an

overload or short somewhere in the

electrical system.

(1) fuse Box

REPLACING FUSE(AN)

Tg1o757a

The fuse is located under the right

side of the instrument panel.

Tg1o767a

TG110-AU-07.indd 37

2013-03-15 오후 5:11:59

Summary of Contents for PX1002
































































































































































































































Search results

Summary of Contents for PX1002

Reviews:

Related manuals for PX1002

Brands by name

Popular brands

Kioti PX1002, Owner'S Manual

Search results

Summary of Contents for PX1002

Reviews:

Related manuals for PX1002

Brands by name

Popular brands