Kioti RX6030 Manual Download

Page: 57 / 252

spEcifications

in accordance to EU directive 78/764/Ec the following table shows vibration levels measured on seats, in aws.

* aws = correct weighted value of the vibration acceleration (m/s

)

operator's Vibration level

seat type

Directive of the european

parliament and of the council

light-weight operator

heavy-weight opeartor

W08ss

78/764/EEc

0.83 m/s

0.75 m/s



More information on Whole Body Vibration (WBV) on agricultural tractors can be found in more specific

publications and the relative risks can be taken into account following the laws of the country. in order to

correctly estimate statistical values based on your daily work on the tractor, a specific measure instrument

is required, such a three-axis accelerometer applied to the seat

iMportant

the vibration level transmitted to the body as a whole depend on different parameters, some of them relating to

the machine, others to the terrain and many specific for the operator. The prevailing parameters are the type of

terrain or work surface and the ground speed.

Vibrations cause discomfort for the operator and in some cases put his/her health and safety at risk.

Make sure that the tractor is in good condition and that all routine servicing is correctly and regularly carried out.

check tire pressure and the steering and braking systems.

check that the operator's seat and adjustment systems are in good condition, then adjust the seat to the opera-

tor's weight and size.

•

warninG

ViBration leVels of the tractor exposition to ViBrations

TF120(RX6030,7030,8030)-AU-03.in11 11

2016-06-17 오후 1:53:48

Summary of Contents for RX6030





























































































































































































































































Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands

Kioti RX6030, Manual

Search results

Summary of Contents for RX6030

Reviews:

Related manuals for RX6030

Brands by name

Popular brands