PrintNET Client
- 51 -
Print Separator Sheets:
Configure job or set separator sheets to be printed. Separator sheets contain
information regarding current print job such as Job Number, Requester, Images printed (file names),
output total (sq. ft / sq. m.).
Deck Info:
Override the installed media per roll deck. Auto is defaulted and will display to the user the
selected media from the IPS touch screen.
Monochrome PDF Processing:
Select output dither mode based on image type (line, line/photo, mixed,
etc). Min Feature Size ensures that the finest detail can be output to the printer.
Other:
x
Min Cut Length – instructs the printer to cut paper at no less than this length (in or mm)
x
Max Image Length – instructs the printer to cut paper to no more than this length (ft or m)
x
Image Width Removal (pixels) – Image width tolerance adjustment used for documents that
may be over 36”x36”. (e.g. image data is 36.5” x 36.5”, this is too large to print to the . Value set
to 600 (600 pixels = 1 inch) would “ignore” any image data past 36”).
x
Lead Edge Void (pixels) – amount of “white space” to add to the printed output. (600 pixels = 1
inch)
x
Delay Between Sets (seconds) – Amount of time to pause the print queue between sets.
x
JIS Tolerance (in) – Images sent to the IPS without a Job Ticket (FTP/LPR) will be printed to exact
JIS sizes.
x
Ignore Job Time – Unchecked verifies the time specified in the job ticket prior to printing. Used to
schedule print jobs for a later date/time.
x
Hold Paper After Print – When Selected the printer will hold the paper in the ready position for 13
seconds.
x
Preload Paper – When selected this will load the paper to the ready position for the next print.
x
Ignore HDI Borders – When selected this will ignore borders that may be in by default within the
HDI (AC) driver.
x
Enable Abacus – If available when selected this will enable the use of Abacus software.
