3 Operation of components
◆
Timer
Indicate the total runtime.
◆
Rpm meter of engine
Indicate the rpm of engine within one minute.
◆
Oil level gauge
When start switch is at ON, it will display the oil level
in the fuel tank.
Importance
z
If fuel level is too low, supply the fuel in advance.
If fuel tank is empty, air will flow in the fuel
system. In such case carry out the exhaust.
◆
Meter of water temperature
It displays the temperature of cooling water when
start key is at ON and the real-time temperature of
water when engine runs.
◆
Meter of engine oil pressure
It displays 0 when start key is at ON and the real-time
pressure of engine oil when engine runs.
▆
Simple measures
Indicator of head lamp
It lights when button of head lamp is
operated.
Indicator of jammed air filter
It lights when air filter is jammed and
start key is at ON. Check the air filter
if it lights. It turns off when engine
starts.
Indicator of charging
It informs the charging system of
abnormality when engine runs.
It turns on when start key is at ON and
turns off when engine starts.
Illuminated indicator reminds the check
on charging loop.
Indicator of jammed fuel filter
It lights when start key is at ON.
It turns off when engine starts.
Check the oil/water separator when
it turns on.
Indicator of engine oil pressure
It lights when pressure of engine oil
is too low abnormally.
It lights when start key is at ON. It
turns off when engine starts.
Check the level of engine oil when it
turns on.
Pre-heating
indicator
It lights when start key is at ON and
turns off in several seconds.
It turns off when engine starts.
Indicator of abnormal water
temperature
It lights when water temperature is
abnormal. In such case, carry out
the check as follows:
1. If cooling water is empty or leaks
2. If fan belt is loose
3. If there is any soil or rubbish on
the radiator
Stop the engine and cool it
completely before check.
Indicator of turning
It lights when driver operates the
turning handle and turns off when
turning handle returns.
Indicator of abnormal oil
temperature
It lights when temperature of
hydraulic oil is abnormal. If it turns
on, interrupt the job. Run the
engine without load and wait until it
turns off.
Importance
* Daily check cannot be done just depending
on simple measures.
13
Summary of Contents for KDD03
Page 2: ......
