4 Using and adjusting loader
◆
Note the allowable water depth
During operation in water, after conforming the
airproof of each plug and piston, use the machine
in the depth range of the differential shell.
Important
* After the operation, do clean the clay on the
machine and wash the machine. Then add oil
and grease on the pivots.
* During operation on the beach, pay special
attention to washing the machine and cleaning
the salt. Keep the electric assembly line in a good
manner to avoid corrosion.
■
Stop
Avoid urgent stopping. Try to stop the machine
slowly.
1. Keep your feet away from the accelerator
pedal and the pedal will return the original
position.
2. Step on the brake pedal and stop the
machine.
3. Adjust forward and backwards handle bar on
[EMPTY].
4.Do the stopping brake by stopping brake
switch.
5. Adjust the handle bar of shovel on [FALL] and
fall the shovel on the ground.
6. Adjust the lock bottom of the shovel on
[LOCKED].
Supplement
：
* Choose the flat ground of good stand and avoid
the dangerous place when stopping the
machine. If having to stop the machine on a
ramp, use fixed cushion on the wheel and keep
the shovel contacting the ground.
4.10 Using method of
soft moving pedal
Use the soft moving pedal effectively and
properly according to the work site.
■
Operation of soft moving pedal
(Micro drive
pedal)
Use as the following way according to the goal.
◆
stopping the car during operation
1. The pedal is linked with the spouting amount
control and brake of the hydraulic system
pump.
2. During operation and to stop the machine
safely, first, step on the pedal lightly. The
hydraulic pump system enters [MEDIUM], and
the machine will be stopped with decreased
speed.
3. If more fully stepped, the main brake status is
formed to stop the machine safely.
◆
Approaching the object
1. Gunning the engine and stepping on the soft
moving pedal can approach the object.
2. If do not using the soft moving pedal, stepping
and adjusting the gun pedal can approach the
object.
When digging deeply and off and on
◆
1. Repeat deepening operation by soft moving
pedal.
2. Fully step on the pedal and let the pedal return
quickly. Adapt the pedal, and then the hydraulic
pump reaches the medium status and spouts
repeatedly. Do the operation thoroughly, off and
on.
■
Suitable operation method
◆
Loading operation
1. Stepping on the soft moving pedal,
approaching the object slowly. Only stepping and
adjusting the gun pedal can approach the object
slowly.
2. During the course of approaching the object by
soft moving pedal, when using the shovel,
operate with the engine rotating highly; the
speed of the shovel will not be reduced
3. Step on the soft moving pedal on the midway;
after approaching the stopping position slowly,
fully step on the soft moving pedal to stop the
machine safely.
Fil
◆
ling operation
1. Step on the soft moving pedal on the midway;
after approaching the stopping position slowly,
fully step on the soft moving pedal to stop the
machine safely on the object position.
2. If the outside load is increased, the speed of
the machine will be decreased automatically to
avoid stopping the machine.
3. During trapping, if the outside load of the
shovel is released, the rotation of the wheel will
return the original status.
4. To avoid wrong operation around the filling
hole, step on the soft moving pedal and center
the power on the working fittings and operate
safely.
20
Summary of Contents for KDD03
Page 2: ......
