26
Transfer switch of KPEC series ATS cabinet is controlled by KPD100 intelligent controller installed
on ATS cabinet, so the following explanation gives a operation process of KPEC series ATS
cabinet.
3.5.1 KPD
100
controller
Summary
KPD100 controller is mainly used to monitor the power grid. It will start the generator set and switch
to load power supply when the power grid is abnormal and automatically return to grid power supply
when the grid restores.
KPD100 controller monitors the power grid and indicates its status by light –emitting diode LED.
Features
1: control protection function:
Realize the function of generator manual or automatic starting, stopping, ATS transfer and alarm
protection;
2: 12/24VDC power supply;
3: manual and automatic working modes to choose;
4: AMF grid fault automatic start/stop control function;
5: RMS voltage detection functions of generator and power grid;
6: ATS manual and automatic mode to choose;
7: regular automatic maintenance can be set;
8: light –emitting diode LED fault display function;
9: low-speed and over-speed protection of engine;
10: configurable input/output terminal and condition display function;
11: battery voltage and charge detection function;
12: working hour counting function;
13: RS232 communication function. It can monitor and set the parameters by upper machine.
Summary of Contents for KPEC Series
