19
After starting the software, the following window will appear.
If the software hasn’t been able to detect the right COM port please select it in the first dropdown menu under PC COM. No
other settings are needed right now.
Now click
Retrieve
to get the current settings from the LOGBOX SE.
After program start
always
click Retrieve to load the program with your current settings and the capabilities of
your Logbox SE. Potentially save the settings for future reference.
Do not click Send unless you are very certain that the settings in the software are correct. After program start all
settings are off or zero and Send would reset your LOGBOX SE completely.
If by accident the LOGBOX SE is messed up it is possible to go back to the original settings by using the Set Default Config
button explained later in this manual.
9.1
Toolbar
The File menu offers the following:
In this menu you can create new configurations (New) and save them (Save / Save
As…), or you can open existing configuration (Open…). Print, Print Preview and Printer
Setup are also possible to allow you to have a hardcopy of the settings at hand when
changing some settings.
Last four configurations are directly accessible. With Exit you can close the application.
