DE
EN
FR ES
63
WE01FEDSBA2205
www.kipp.com
export@kipp.com
Tel. +49 7454 793-0
Clean the vice regularly from accumulated swarf and dirt. The traction spindle must be lightly oiled repeatedly during purely dry
machining. Make sure that all threads are clean and not damaged.
After cleaning and when not in use for a long period, oil all parts lightly to prevent corrosion. To reach the space between the jaw
components, please note point 3.9 on dismantling the parts.
4 . C A R E A N D M A I N T E N A N C E
5 . S E R V I C E
HEINRICH KIPP WERK GmbH & Co. KG
Heubergstrasse 2
72172 Sulz am Neckar
Tel. +49 7454 793-0
Fax +49 7454 793-7983
info@kipp.com
www.kipp.com
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior
written permission of HEINRICH KIPP WERK GmbH & Co. KG is prohibited.
HEINRICH KIPP WERK GmbH & Co. KG continuously develops its products in compliance with its own policy.
HEINRICH KIPP WERK GmbH & Co. KG reserves the right to make changes and improvements to any of the products described
in this document without prior notice.HEINRICH KIPP WERK GmbH & Co. KG is under no circumstances responsible for any type
of special, incidental, consequential or indirect damage regardless of how this damage is caused.
The contents of this document are presented in its current version. HEINRICH KIPP WERK GmbH & Co. KG does not assume any
warranty, whether explicitly or implicitly, for the correctness or completeness of the content of this document including, but
not limited to, the implied warranties of merchantability and fitness for a particular purpose, unless the applicable laws or case
law should make such liability mandatory. HEINRICH KIPP WERK GmbH & Co. KG reserves the right to make changes to this
document or withdraw this document without prior notice.
