10
© 2011-2020 KIRAMEK, INC.
power & can connections
BRN
GRN
BRN/RED
CAN-L
1-WIRE CAN (HONDA)
CAN-H
CAN HARNESS
CAN HARNESS
CAN HARNESS
1)
ONLY use the Green wire when installing in HONDA cars you know
use 1-wire CAN. All other car manufacturers use CAN-H & CAN-L.
2)
NEVER connect all 3 wires in the CAN HARNESS! You either use
CAN-H & CAN-L as a pair, or use the Green wire only on select Hondas.
WARNINGS!
The BROWN wire is a digital I/O line that must be con-
nected to the car’s CAN-LOW line. CAN-L is Pin-14 of
the car’s OBD connector on many Toyota, Lexus, Subaru
BRZ and Nissan cars. But on other cars it is either in a
different location in the car’s OBD connector, or a different location in the
car altogether. For this reason we have prepared separate Install Guides
for cars that cannot use OBD which provide details on where to connect the
BROWN wire.
DON’T CONFUSE CAN-L WITH THE BROWN SIREN OUTPUT!
The GREEN wire is a digital I/O line that must be con-
nected to the single CAN line, but only on certain HONDA
cars. Such connections are beyond the scope of this manu-
al, so consult our vehicle-specific Install Guide for details.
The BROWN/RED wire is a digital I/O line that must be
connected to the car’s CAN-HIGH line. CAN-H is Pin-6
of the car’s OBD connector on many Toyota, Subaru BRZ,
Lexus and Nissan cars. But on other cars it is either in a
different location in the car’s OBD connector, or a different location in the
car altogether. For this reason we have prepared separate Install Guides
for cars that cannot use OBD which provide details on where to connect the
BROWN/RED wire.
CAN-L
BRN
CAN-H
BRN/RED
1-WIRE
CAN
GRN
