Page 7 / 8
Updated 24.3.2013
Instructions for use- TUBE XL mark II
EN
Water hygiene
Take care of the sanitation and hygiene of the pool. Instructions for use of chemicals can be found
on the chemical containers. These instructions must be followed. Having too high values of
chemicals can corrode all parts in the system.
NOTICE!
When using chemicals, it is important to
follow the pH level of the water and it should remain within 7,0 – 7,6. The use of chemicals usually
lowers the pH level, which might again result in corroding system parts. Use only chemicals
recommended by the manufacturer.
Other safety issues
Take care of the safety of children in and around the pool.
Do not overheat the water. Highest recommended temperature is 37
°
C.
People with heart condition should leave the bath water temperature below 37 °C.
Warranty
Our products have a 24 month warranty on materials and workmanship. The warranty is valid when
the user reads the product instructions and follows them.
NOTE! Differing from the above mentioned. Products used for commercial purposes are
granted only 6-month warranty period.
•
Warranty does not cover normal wear and tear caused by the use
•
Warranty also does not replace any damage caused by user errors.
•
Warranty does not cover any damage caused by frost, as they can be avoided through correct
use.
•
Warranty does not apply to the possible corrosion arising from incorrect use of chemicals. In
particular the pH value should be kept at neutral level and any chemical dosages should not be
too large.
•
Please contact the seller right away in case of possible warranty issue. Self-made repair
attempts will void warranty.
17
