DP485 Service Manual
19
parameters will be read.
Step 7.
In the software interface, modify parameters, select Program
→
Write Data. In the prompted dialog
box, click Write. The radio parameters will be written.
5.8.Upgrade
To upgrade the radio program using the software, take the following steps.
Step 1.
Power off the radio. Connect the radio to the PC using the programming cable.
Note:
While connecting the programming cable for the first time, please install its driver.
Step 2.
Double click the upgrade tool as shown below.
DMR Software Upgrade Tool.exe
Note:
This tool upgrades firmware while retaining the previous programming and calibration data.
Step 3.
The interface as shown below will be displayed.
Step 4.
S
elect the communication port number and the data rate “460800”.
Click to load upgrade file.
Name of loaded file
Select communication
port number and data
rate.