5
6
2011/11/10 16:34:26
Saved
.. .
CAP.
REC.
:3071
:02:21:18
. Infrared supplement light
When the light
≤
0.1LUX, the infrared supplement light can be
manually turned on to supplement light.
The effective recording distance is
≥
0.5-3m.
. High definition infrared camera: CMOS 12 million pixels,
record continuously and take high definition photos. Rotatable
mechanical light infrared LED light supplement,
ensures that the images taken in the dark environment will be
clear and real. In normal environment, the picture will be vivid
and real. The resolution of the record has the options of
1280*720/800*600/720*480; the resolution of the photo is
4032 x 3024.
. Rotatable infrared filter: The infrared filter is rotatable,
which is used to amend the chromatic aberration in recording.
(Note: If you turn on the infrared light under low light condition,
you need to rotate off the cover.)
. MIC Speaker: The voice is amplified through the speaker.
. Shoulder MIC: Shoulder MIC can be connected to the
recorder through the special connecting cable, and can be
used to make a call and amplify the voice.
. Record key
In any operative status (except “pass word” mode), press the
key and the display screen is activated to record the image.
The file will be saved as
AVI format. During recording,
press the key again to
“pause” it and the file will be
saved automatically.
. Charging the battery
This recorder has the large capacity built-in rechargeable Li-
polymer battery pack. Two means of charging are available.
A. Charging with adapter:
Insert the bigger USB terminal into the adapter; connect the
adapter to the appropriate AC power supply outlet; and then
insert the smaller USB terminal to USB port on the recorder.
Be sure the power is off when charging.
When USB terminal connects to the recorder, the recorder
enters into “pass word” login mode, press ON/OFF key to pass
this mode. During charging, LED indicator lights red while the
charge indicator on the down-left LCD screen rolls (the recorder
stays at operative mode);
Unlock
spring
Insert:
Hold the plug, match
the red point on the
plug to the hole on
the recorder and
push into it to finish
the connection. (See
the picture on the
left.)
Note: When
completely pushed
the plug into the
connector, the plug
is automatically
locked, and cannot
be pulled out unless
pulling the right
place.
Plug off:
Hold the unlock
spring and pull
backward to pull off
the plug. (See the
picture on the left.)
14
15
16
17
18
19
. Connector for connecting two-way radio
This recorder can connect to the majority of the radios on the
market through the movable pull-push auto-lock connecting
cable. See the pictures below:
After charging for 4.5 hours, Red LED indicator lights off,
Green LED lights on, while the charge indicator on the down-
left LCD screen stops to roll and presents in full grid (the
recorder stays at operative mode), which means the battery
has been fully charged. Pull out the USB terminal to finish
charging.
B. Charging with PC USB port: Connect the recorder to PC
USB port with USB cable to charge the built-in battery.
Note:
●
The battery is not charged in the factory. Please charge the battery
completely for the first time.
●
When charging the battery after buying or not using this machine
for more than two months, charge it time after time to charge it fully.
●
When the battery is fully charged or “Low Battery” is not displayed,
do not charge it, otherwise it will affect the life and performance of
the battery.
13
20