DTMF CALLING
Confirming Stored DTMF Numbers
To confirm stored DTMF Numbers,
1. Press [DIAL] to enter Dialling mode.
LCD display --------- D
2. Press key to enter into confirming mode.
3. Enter desired memory channel Number (1~9).
Display the stored number and transmit corresponding DTMF
tone.
Transmitting Stored DTMF Numbers
To transmit stored DTMF Number,
1. Press [DIAL] to enter dialling mode.
LCD display -------- D.
2.Enter the desired memory channel number (1~9) that
Contains the DTMF number to be transmitted.
3. Restore to the original display.
Erasing Stored DTMF Numbers
To erase the number stored in memory channel,
1. Press [DIAL] to enter Dialling mode.
LCD display ------- D.
2. Press D key to enter erasing mode.
LCD display CLrd
Press any key except 1~9 to cancel process.
3. Enter the Auto-dial memory channel (0~9) that.
REDIALING
You can re-transmit up to 16 digits maximum that you last sent.
1. Press [DIAL] to enter dialling mode.
LCD display -------- .
2. Press 0 key to call the last number.
Switch OFF the power of the transceiver to clear the redial
memory.
Note:
Contains the DTMF number to be erased.
4. Restored to the original display.
*
2
15
2
16
