Selects operating channels. Also used for selecting squelch
level, If so programmed by your dealer, used for selecting
channels to Be locked.
PTT(Push-to-Talk) switch
Switches the transceiver between receive and transmit modes.
MONI Button
Press to monitor activity on your selected channel. Also used
with QT/DTMF to mute the speaker after these functions have
opened Squelch.
DIAL key
Used for dialling a number with the Store and Send function, or
Used for storing, confirming, transmitting, or erasing numbers
with The Auto-dial function.
FUNC Key
Press or release to enable the other functions of the transceiver.
SCAN key
Used for controlling the Scan function, or used with FUNC key
Together to exclude the locked channel from scanning and set
Condition of indicator of LCD.
LOW key
Used for setting the transmit power
DTMF keypad
Used for storing or transmitting DTMF numbers.
MIC-SP jacks
If desired, connect a speaker-microphone here.
POWER/VOL control
Turning clockwise to switch the transceiver ON, or counter
clockwise to switch the transceiver OFF, this also increases or
decreases the transceiver Volume.
LED indicator
Lights red while transmitting. Flashes red when the battery
voltage Level is low. Flashes orange when receiving the correct
signalling For Code Squelch, selective Call.
CHANNEL selector
GETTING ACQUAINTED
2
7
2
8
