background image

14

Press 

“ ”

on the keyboard to enter 

Medium Power (Low)

 

and press Enter. Press 

“←

/

→”

key to make the TX power at 2+/-

0.2w and then press Enter to store the setting. Use the same way to 

adjust 

Medium Power (Medium), Medium Power (Medium High), 

Medium Power (High)

 at 2+/-0.2w.

Press 

“↓”

on the keyboard to enter 

High Power (Low)

 and 

press Enter. Press 

“←

/

→”

key to make the TX power at 4+/-0.3w 

and then press Enter to store the setting. Use the same way to 

adjust 

High Power (Medium), High Power (Medium High), High 

Power (High)

 at 4+/-0.3w. 

6.3.5 Frequency Deviation Adjustment

Input 150mV, 1000Hz audio signals from the radio MIC, and press 

“↓”

to enter 

AK2346 VR2 Wide Band Low

 and press Enter. 

Press 

“←

/

→”

key to make the maximum frequency deviation at 

3.9+/-0.2KHZ. 

Use the same way to make the maximum frequency deviation of 

 

AK2346 VR2 Wide Band Medium

AK2346 VR2 Wide Band 

High

 at 3.9+/-0.2KHZ; 

 AK2346 VR2 Medium Band Medium

 

at 3.2+/-0.1KHZ;  

AK2346 VR2 Narrow Band Medium

 at 2.0+/-

0.2KHZ. (Notice: On the comprehensive test device, the audio 

output level is 150mv and the filter is set to 50HZ~15K.) 

6.3.6 DCS (DQT) TX Signal Wave Shape and Frequency 

Adjustment

Under the computer test mode, press 

“↓”

on the keyboard to 

enter 

DCS Frequency Deviation (Wide, Low)

 and press Enter. 

Press 

“←

/

→”

key to make the DCS Frequency Deviation at 

0.85+/-0.15KHZ. Use the same way to adjust 

DCS Frequency 

Deviation (Wide, Medium)

 

DCS Frequency Deviation (Wide, 

High)

 at 0.80+/-0.10KHz; 

DCS Frequency Deviation (Medium, 

Medium)

 at 0.6+/-0.1KHz; 

DCS Frequency Deviation (Narrow, 

Medium)

 at 0.4+/-0.1KHz. (Notice: The filter is set to 

20HZ~300HZ.) 

6.3.7 CTCSS (QT) Frequency Deviation Adjustment

Under the computer test mode, press 

“↓”

on the keyboard to 

enter 

CTC Frequency Deviation (67.0HZ ,Wide, Low)

 and 

press Enter. Press 

“←

/

→”

key to make the CTC Frequency 

Deviation at 0.80+/-0.10KHZ. Use the same way to adjust 

CTC 

Frequency Deviation (67.HZ ,Wide, Medium)

CTC Frequency 

Deviation (67.HZ, Wide, High)

 at 0.80+/-0.10KHZ; 

CTC 

Frequency Deviation (67.0HZ, Medium, Medium)

 at 0.6+/-

0.1KHZ; 

CTC Frequency Deviation (67.0HZ, Narrow, Medium)

 

at 0.4+/-0.1KHZ; the test and specifications are the same for 

CTC 

Frequency Deviation (136.5HZ) and  

CTC Frequency Deviation 

(254.1HZ).  (Notice: The filter is set to 20HZ~300HZ.)

6.3.8 DTMF Frequency Deviation Adjustment

Under the computer test mode, press 

“↓”

on the keyboard to 

enter 

DTMF Frequency Deviation (Wide Band)

 and press 

Enter. Press 

“←

/

→”

key to make the DTMF Frequency Deviation 

at 3+/-0.3KHZ.

Press 

“↓”

on the keyboard to enter 

DTMF Frequency 

Deviation (Medium Band)

 and press Enter. Press 

“←

/

→”

key to 

make the DTMF Frequency Deviation at 2.3+/-0.2KHZ. 

Press 

“↓”

on the keyboard to enter 

DTMF Frequency 

Deviation (Narrow Band)

 and press Enter. Press 

“←

/

→”

key to 

make the DTMF Frequency Deviation at 1.5+/-0.1KHZ.

6.3.9 TONE Frequency Deviation Adjustment

Under the computer test mode, press 

“↓”

on the keyboard to 

enter 

TONE Frequency Deviation (Wide Band)

 and press 

Enter. Press 

“←

/

→”

key to make the TONE Frequency Deviation 

at 3+/-0.3KHZ.

Press 

“↓”

on the keyboard to enter 

TONE Frequency 

Deviation (Medium Band)

 and press Enter. Press 

“←

/

→”

key to 

make the TONE Frequency Deviation at 2.3+/-0.2KHZ. 

Press 

“↓”

on the keyboard to enter 

TONE Frequency 

Deviation (Narrow Band)

 and press Enter. Press 

“←

/

→”

key to 

make the TONE Frequency Deviation at 1.5+/-0.1KHZ.

6.3.10 VOX Gain Debugging 

Under the computer test mode, press 

“↓”

on the keyboard to 

enter 

VOX Gain 5 (Medium)

 (set the output level on the 

comprehensive test device to 15mv) and press Enter to store the 

data ----- do not press Enter until the numbers on the screen 

become steady. 

Press 

“↓”

on the keyboard to enter 

VOX Gain 1 (Medium)

 

(set the output level on the comprehensive test device to 100mv) 

and press Enter. Do not press Enter to store the data until the 

numbers on the screen become steady.

6.3.11 Receiver Sensitivity

Under the computer test mode, set the comprehensive test device 

at the sate of testing pass band, and press 

“↓”

on the keyboard 

to enter 

Receiver Sensitivity (Low)

 and press Enter. Press 

“←

/

→”

key to make the frequency waveform to the middle of the 

whole waveform. Then press Enter to store the data. It's the same 

to other 4 testing points (notice the corresponding frequency 

change). 

  

6.3.12 AK2346 Receiving Voice Debugging 

Under the computer test mode, set the RX frequency on the 

comprehensive test device to the middle frequency among the 5 

testing frequency points; signal strength at 1mv; AF voltage unit is 

W

.

Press 

“↓”

on the keyboard to enter 

AK2346 VR3 (Wide Band, 

Medium)

 and press Enter. Press 

“←

/

→”

key to make the AF 

power to 0.4+/-0.05W. Set the AF power of 

AK2346 VR3 (Medium 

Band, Medium)

 and 

AK2346 VR3 (Narrow Band, Medium)

 to 

0.4+/-0.05W. (On the comprehensive test device, the AF deviation 

is 3KHZ, 2.5KHZ, and 1.5KHZ separately.) 

6.3.13 Receiver Squelch Setting

Under the computer test mode, press 

“↓”

on the keyboard to 

enter 

SQL 1 ON (Wide Band, Low)

 (on the comprehensive test 

device the RX frequency is low frequency, SIAND is adjusted to 

10dB). Press Enter to watch the RX sensitivity and press Enter to 

store the data after the value becomes steady. It's the same for 

SQL 1 ON (Wide Band, Medium Low)

SQL 1 ON (Wide 

Band, Medium)

SQL 1 ON (Wide Band, Medium High)

, and 

SQL 1 ON (Wide Band, High)

. (On the comprehensive test 

device, the AF deviation is 3KHZ, 2.4KHZ, and 1.5KHZ separately.)

Press 

“↓”

on the keyboard to enter 

SQL 1 OFF (Wide Band, 

Low)

 (on the comprehensive test device the RX frequency is low 

PT5200 SERVICE MANUAL

Summary of Contents for PT5200-01




























Reviews: