5
6
2.3 Installing the Antenna
2.4 Installing the External
Speaker/Microphone
Open the cover for external
speaker/microphone jack, and
then insert the external
speaker/microphone plug into
the jack on the radio.
Hold the bottom of the
antenna and turn the antenna
clockwise into the connector
on the top of the radio until
secure.
Match the two holes of the
belt clip with those on the rear
of the radio, and then fix the
belt clip to the radio with two
2.5x8.0 screws. Loose the
fixing screws to remove the
belt clip.
2.5 Installing the Belt Clip
3. Radio Overview
A. LED Indicator
Lights red while transmitting; lights green while
receiving; flashes red when the radio is in low
power.
B. On/Off/Volume Control Knob
Turn clockwise until you hear a click to turn the
radio power on. Turn counterclockwise until you
hear a click to turn it off.
Rotate it to adjust the volume after turning on the
radio.
C. Channel Selector Knob
Rotate to select channel 1-16.
D. Antenna
E. Top Button (programmable button)
F. PTT (Push-To-Talk) Button
Press and hold the PTT button and speak into the
microphone, your voice can be sent to the
recipient. Release the PTT button to receive.
G. Side Button 1 (programmable button)
H. Side Button 2 (programmable button)
I. Microphone
J. External Speaker/Microphone Jack
External speaker/microphone can be connected to
the radio through this jack.
4. Basic Operation
4.1. Switch On
Switch on the radio by turning the On/Off/Volume
control knob clockwise until a click is heard. If
programmed, a beep tone will be heard.
