PT6500 User’s Manual
Page 11 of 30
The operations are as follows:
Set scanning:
1. As shown: in CH 1 , press
, then
utilities is shown;
2. Press
, then scan is shown;
3. Press
, then enter selecting scan;
4. Select Scan On or Scan Off with
/
, then press
to confirm it.
If can not enter that way, you have to set in PC communications;
Set back light:
1. As shown: in CH 1 , press
, utilities is shown.
2. Press
to enter select mode,
3. Press
/
, and Back Light is shown,
4. Press
to select On or Off,
5. Select On or Off with
/
, press
to confirm.
Set the squelch level:
1. As shown: in CH 1 , press
, utilities is shown.
2. Press
to enter select mode,
3. Press
/
, then Squelch Level is shown,
4. Press
to select squelch level, e.g., Leve 0
5. Change the squelch level with
/
, then press
to confirm.