•
The machine must be decalcified regularly. Use a proven decalcification
aid and follow its instructions carefully.
•
The coffee machine can be cleaned with a damp cloth. Never immerse
the base unit into water.
Timer function:
This coffee machine has an auto start function. It is then possible to delay the
brewing start by up to 12 hours.
o
The timer is activated by turning on and holding the on/off
button for more than 2 seconds.
o
The indicator becomes yellow and will flash.
o
Press again shortly on the button to increase the number of
hours of the delay.
o
The indicator will show the chosen number of hours by short
flashes between longer pauses.
o
When finished with the setting, the indicator will stop flashing
and by constant yellow light show that the timer countdown
has started.
o
The timer start function can be cancelled by a 2 second
activation of the start/stop button.
Calcification alarm:
The coffee machine has an automatic calcium built-up alarm to warn for
possible reduced function. If the indicator flashes red after the brewing cycle
then the machine should be decalcified. The alarm is reset by turning off the
machine. If requested it is possible to disable the calcification alarm
permanently by holding the button for 10 seconds while the machine is turned
on.
Error alarm:
If the indicator is red and makes 2 short flashes then another error is present.
It is properly caused by low supply voltage. The alarm is reset by pressing
the on/off button. The same alarm indication can also be caused by an
internal error in the coffee machine. In this case the coffee machine must be
repaired.
! Important Note !
Please
descale
your coffee maker
regularly
. The distances for
this purpose are based on the water quality. They thus extend
the life of your coffee machine and prevent repairs.
