R1040 MAINTENANCE MANUAL
Page 4 of 48
Indicates No. off Cylinders as
6
2.1
Engine illustrations
Fig. 2.2.1 Air Inlet side
Fig. 2.2.2 Exhaust Manifold side
Inlet Manifold Side Exhaust Manifold Side
1 Air inlet manifold
13 Stop solenoid
2 Air cleaner
14 Breather (Positive crankcase ventilation)
3 Oil filling body
15 Alternator (for battery charging)
4 Fuel pump
16 Crankcase
5 Fuel Feed pump
17 Starter
6. Spin-on Lube oil filter
18. Engine mounting foot (Gear end side)
7. Spin-on Fuel Filter
19. Engine mounting foot (Flywheel end side)
8. Dipstick
20. Exhaust manifold
9. Lube oil sump with drain Plug
21. Rocker cover
10. Gear casing
22. Flywheel housing
11. Radiator
23. Flywheel
12. Balance Water Tank
2.3
Engine lifting device
2.3.3
For bare engine for ’R1040/R1080’
Before lifting the engine first fix the lifting hooks on the engine and then lift the engine
(see Fig. 2.3.1). The lifting hooks provided on the engine are meant for lifting bare engine
only. Use of engine lifting hooks for lifting of generating set must be avoided as it can
cause damage to engine or generating set in the event of breakage.
18
15
16
17
19
23
22
21
20
2
7
8
9
1
6
4
10
5
3
11
12
13
14
