background image

Operation

Personnel:

n

User

Protective equipment:

n

Protective gloves

NOTICE!

Wear suitable protective gloves when using the

unit. These gloves must comply with either PPE

Ordinance 2016/424 or the MDD Directive

93/42/EEC (which will be superseded on 27 May

2021 by MDR Regulation 2017/745).

7.1  Switching on the unit

1.

Insert the key into the key switch.

2.

Turn unit key to position “1”.

ð

The Display shows the interior temperature.

3.

Remove the key and store it so it is protected against unau-

thorised access.

4.

Check target temperature and adjust if necessary 

Ä

 Chapter

6.2.1.2 “Displaying and changing the target temperature”

on page 43

.

Lead time of the temperature alarm!
The temperature alarm is active at the ear-

liest when the target temperature is reached,

and at the latest after two hours of unit ope-

ration.

5.

Stock the unit when the target temperature is reached.

The door is stiff when it is first opened
Cooling creates a vacuum in the interior, so

you may require additional force when

opening the door for the first time.

 Operation

Switching on the unit

26.05.2021

Refrigerator/freezer BL series

49

Summary of Contents for 100 03 25C00





















































































Reviews: