The safety inspection performed by the owner contains the fol-
lowing individual inspections and their documentation:
1 - Visual inspection
2 - Function check
3 - Temperature check
4 - Temperature alarm test
5 - Inspection of the condenser
6 - Documentation of the test results
NOTICE!
If there is any doubt that the unit is in the correct
condition, immediately stop using the unit. To pre-
vent unintended use, label the unit accordingly.
Contact the service department
1.
Check the entire unit for completeness, correct set-up and
damage.
2.
Check the following parts of the unit individually for damage:
n
Door handle
n
Interior
n
Door seal
3.
If there is damage and functionality is not ensured, decom-
mission the unit and contact the service department
.
Check that the following parts of the unit are functional:
n
Door handle
Special tool:
n
Calibrated temperature measuring device
1.
Create a simulation of chilled goods for the sensor.
2.
Attach measuring sensor in the interior at medium height.
3.
Read temperature after 120 minutes.
4.
After the check, clean and disinfect the unit
“Cleaning and disinfection” on page 58
.
Contents of the safety inspection
Visual inspection
Function check
Checking the temperature
Maintenance
Safety inspection
26.05.2021
Refrigerator/freezer BL series
62