Kirsch Cellular Shade Automation III, Installation Instructions Manual

20

INSTALLATION

CARE

Removing the Shade, If Necessary

■

Lower the shade approximately 4”.

■

While holding the headrail, push back on the bottom tab of the installation 
bracket with a flat head screwdriver to release the bottom of the headrail.

■

After releasing the bottom edge, roll the back of the headrail down and out 
from the bracket.

Cleaning Procedures

Kirsch

®

 Cellular Shades are made of anti-static, dust-resistant fabric which repels dirt and dust. For most cellular fabrics, the 

following cleaning options are available.

Dusting

■

Regular light dusting with a feather duster is all the cleaning that is needed in most circumstances.

Vacuuming

CAUTION:  

Do not vacuum Oceanside fabrics.

■

For deeper cleaning, vacuum gently with a brush attachment.

Compressed Air/Hair Dryer (Cool Setting)

■

Use compressed air or a hair-dryer on a cool setting to blow dust and dirt off shades.

Spot-Cleaning

CAUTION:  

Do not spot-clean Harmony, Naturelle, Oceanside, and Sonora fabrics.

■

Prepare a solution of warm water and a mild detergent.

■

Dampen a clean cloth in the solution and wring it out.

■

Dab the spot with the dampened cloth until it is removed. Do not rub the fabric.

■

Allow the shade to dry in the completely lowered (or closed) position.

Bathtub Cleaning/Water Immersion

CAUTION:  

Do not immerse Harmony, Naturelle, Oceanside, and Sonora fabrics. 

■

Immerse the shade in a basin or bathtub filled with warm water and a mild detergent.

IMPORTANT:  

Never immerse the headrail into the solution.

■

Rinse with clean water.

■

Before removing from the rinse water, fully raise the shade and tilt it to allow excess water to drain off.

■

Dry the shade completely in the lowered (or closed) position.

Ultrasonic Cleaning

CAUTION:  

Do not ultrasonically clean Reflections fabrics.

■

Specify that a mild detergent solution be used.

IMPORTANT:  

Never immerse the headrail into the solution.

■

Dry the shade completely in the lowered (or closed) position.

Injection/Extraction Cleaning

This type of professional cleaning injects a cleaning solution into the fabric and extracts the dirty solution in the same motion.

■

Use only the dry method of injection/extraction for Oceanside fabrics.

■

If using injection/extraction for Harmony and Naturelle fabrics, specify that no chemicals are used (water only).

Headrail Cleaning

CAUTION:  

Never use abrasive cleaning methods or harsh chemicals.

■

Dampen a soft, clean cloth in warm water and wring it out.

■

Gently wipe the headrail to remove dirt and dust.

Headrail

Bracket

Back of 

Shade

Remove

Bottom 

Tab