background image

7

INSTALLATION

INSTALLATION

STEP 2:  Mount the Battery Wand (If Applicable)

 

Refer to the appropriate page based on your order.

 

For a battery wand, see below.

 

For a headrail-mounted rechargeable battery wand, see page 7

 

For any other power options, the shade is installed first. See "STEP 3:  Install the Shade" on page 8..

Battery Wand
Install the Battery Wand Clips

 

Hook the battery wand clip onto the back channel of the headrail.

IMPORTANT:  

Position the clip so that the battery wand will be between installation brackets.

 

Rotate the clip down until it snaps into place.

Mount the Battery Wand into the Battery Wand Clip

 

Align the battery wand with its socket  
toward the right-side motor end cap.

 

Push the battery wand straight up into the battery wand clip until it snaps into 
place. Check to make sure the battery wand is secure.

CAUTION:  

Be sure the cable does not become pinched by the battery wand 

clip during installation. Damage or overheating of components could result.

Plug the Power Cable into the Battery Wand

 

On the back of the headrail, connect  
the power cable (coming from the shade)  
into the socket on the battery wand.

Proceed to "STEP 3:  Install the Shade" on page 8

Headrail-Mounted Rechargeable Battery Wand 
Install the Rechargeable Battery Wand Clips

 

Hook the clip onto the back channel of the headrail.

IMPORTANT:  

Position the clip so that the battery wand will be between installation brackets.

 

Rotate the clip down and press the middle of the clip until it snaps into place.

High Mount

(Standard)

Battery Wand Clips

Low Mount

(Optional)

Front of

Headrail

Battery Wand

Clip

Socket

Shown:

High Mount Battery Wand Bracket

Front of

Headrail

Rechargeable

Clip

Summary of Contents for Cellular Shade Automation III

























Reviews: