6
INSTALLATION
INSTALLATION
Mount the Installation Brackets — Outside Mount
■
Mark 2” to 4” in from each jamb.
➤
If more than two “L” installation brackets came with your order, space additional bracket(s) evenly in 24” to 30” intervals
between the end brackets and mark their location. Mount into wood whenever possible.
➤
Adjust mounting clips to allow
1
/
2
” clearance between the vane and the wall (i.e. 2
1
/
4
” for 3
1
/
2
” vane).
■
Drill the screw holes using a
3
∕
32
” drill bit.
WARNING:
Product is heavy. Mount into wood/metal studs or into concrete with concrete anchors. Drywall anchors
are not recommended.
■
Attach the brackets using the screws provided.
■
Center headrail underneath mounting clips.
■
Tilt the headrail and insert it into the front edge of the mounting clip. Pull and roll the headrail up toward the rear of the blind
and snap into place.
2 to 4"
2 to 4"
30" Maximum
30" Maximum
Tilt and
Pull Forward
Roll Back
Vertical Track Headrail
Push Up
Rear
Tab
