5
INSTALLATION
INSTALLATION
Attach the End Brackets
■
Attach the end brackets using two screw through diagonal holes.
➤
If using spacer blocks, use #6 screws long enough for a secure installation
(2½” long screw is recommended).
IMPORTANT:
The tops of the end brackets must align.
CAUTION:
The rear of the end brackets or spacer blocks must be flush against a
flat mounting surface. Do not mount end brackets on a curved molding
.
Attach the Intermediate Brackets (If Required)
■
Evenly space the intermediate bracket(s)
between the two end brackets.
➤
Adjust spacing if needed to avoid
interference with internal headrail
mechanisms.
■
Attach the intermediate bracket(s) with
two screws through diagonal holes.
IMPORTANT:
The tops of the end brackets and intermediate bracket(s) must align.
Extension Brackets (Optional)
Attach 2” or 4” extension brackets to the mounting
surface in the same locations where the end brackets
would be attached.
■
Use the provided screws to mount each extension
bracket.
IMPORTANT:
The tops of the end brackets and
intermediate bracket(s) must align.
■
Attach the installation brackets to the extension
brackets using the screws and not provided, as
shown below.
Spacer Blocks for 2
1
⁄
2
" Slat Size
NOTE:
Spacer blocks are required for the 2
1
⁄
2
" slat size and are optional for
2" slat sizes.
■
Attach a spacer block to each of the two end brackets.
■
If one or more intermediate brackets is required (see chart on <OV>), attach
a spacer block to each intermediate bracket.
■
If extension brackets will be used, it is not necessary to attach spacer blocks.
Proceed to “STEP 2 — Connect the Power Cable, If Applicable” on page 6
Intermediate
Bracket
End
Bracket
End
Bracket
Space Evenly
Space Evenly
1
3
∕
8
" Slat Size
End Bracket
with 2" Extension Bracket
Intermediate Bracket
with 2" Extension Bracket
End and Intermediate Brackets
with 4" Extension Bracket
End Bracket with
2" Extension Bracket
Intermediate Bracket
with 2" Extension Bracket
End and Intermediate Brackets
with 4" Extension Bracket
1
3
∕
8
", 2", and 2
1
∕
2
" Slat Sizes
1
3
∕
8
" Slat Size
End Bracket
Intermediate
Bracket
