background image

 

 

 

Page 

27 

 

 

 

8.  WARRANTY 

One Year Limited Warranty 

The  limited  warranty  program  is  the  only  one  that  applies  to  this  unit,  and  it  sets  forth  all  the 
responsibilities of  KISAE.  There  is  no other  warranty,  other  than  that  described  herein.  Any  implied 
warranty of merchantability of fitness for a particular purpose on this unit is limited in duration to the 
duration of this warranty.  
This  unit  is  warranted,  to  the  original  purchaser  only,  to  be  free  of  defects  in  materials  and 
workmanship  for  one  year  from  the  date  of purchase  without additional  charge. The  warranty does 
not extend to subsequent purchasers or users. 
Manufacturer will not be responsible for any amount of damage in excess of the retail purchase price 
of the unit under any circumstances. Incidental and consequential damages are specifically excluded 
from coverage under this warranty.  
This unit is not intended for commercial use. This warranty does not apply to damage to units from 
misuse or incorrect installation/connection. Misuse includes wiring or connecting to improper polarity 
power sources.  

RETURN/REPAIR POLICY 

If you are experiencing any problems with your unit, please contact our customer service department 
at info@kisaetechnology.com or Phone 1-877-897-5778 before returning product to retail store. After 
speaking  to  a  customer  service  representative,  if  products  are  deemed  non-working  or 
malfunctioning,  the  product  may  be  returned  to  the  purchasing  store  within  30  days  of  original 
purchase. Any defective unit that is returned to manufacturer within 30 days of the date of purchase 
will be replaced free of charge.  
If  such  a  unit  is  returned  more  than  30  days  but  less  than  one  year  from  the  purchase  date, 
manufacturer will repair the unit or, at its option, replace it, free of charge. If the unit is repaired, new 
or reconditioned replacement parts may be used, at manufacturer’s option. A unit may be replaced 
with a new or reconditioned unit of the same or comparable design. The repaired or replaced unit will 
then  be  warranted  under  these  terms  for  the  remainder  of  the  warranty  period.  The  customer  is 
responsible for the shipping charges on all returned items.  

LIMITATIONS 

This  warranty  does  not  cover  accessories,  such  as  adapters  and  batteries,  damage  or  defects 
resulting  from  normal  wear  and  tear  (including  chips,  scratches,  abrasions,  discoloration  or  fading 
due  to  usage  or  exposure  to  sunlight),  accidents,  damage  during  shipping  to  our  service  facility, 
alterations, unauthorized use or repair, neglect, misuse, abuse, failure to follow instructions for care 
and maintenance, fire and flood. 

If  your  problem  is  not  covered  by  his  warranty,  call  our  Customer  Service  Department  at 
info@kisaetechnology.com or 1-877-897-5778 for general information if applicable. 

 

 

Service Contact Information 

Email:info@kisaetechnology.com 

Phone: 1-877-897-5778 

www.kisaepower.com

 

 

 

 
 

 

Printed in China 

Summary of Contents for 120V 12V-2000W-80A




























Reviews: