FarmBoy
®
Agricultural Reaper (Baffle Type)
FB-BC-8642 / 8652
FB-BC4-8636
: www.kisankraft.com
: info@kisankraft.com
: +91.80.22178200
Page 22 of 36
Cutting Method:
1.
Use the front left side cutting.
2.
Guide the blade from your right to left with it
tilted slightly to your left.
3.
When mowing a wide area, start working from
your left end to avoid interference of cut grass.
4.
The blade may be seized by weeds if the
engine speed is too low, or the blade cuts too
deep into weeds. Adjust the engine speed and
cutting depth according to the condition of
object.
WARNING
If the grass or other object gets caught in the blade, or if the unit starts to shake
or vibrate, turn off the engine and check the whole unit. Change the blade if it
has been damaged.
Turn off the engine and make sure the blade has completely stopped before
checking the blade, and removing any object got caught in.
Maintenance
WARNING
Always be sure to stop the engine before inspecting the brush cutter for
problems or performing maintenance.
Never alter the brush cutter or take the engine apart.
FarmBoy
®
Agricultural Reaper (Baffle Type)
FB-BC-8642 / 8652
FB-BC4-8636
: www.kisankraft.com
: info@kisankraft.com
: +91.80.22178200
Page 15 of 36
Harness:
WARNING
ALWAYS WEAR THE PROVIDED HARNESS WHEN
USING THE MACHINE!
Always make sure the machine is hooked securely to
the harness. If you don't, you will be unable to control
the machine safely. This can result in injury to yourself
or others.
Never use a harness with a defective quick release or
any other damage.
How to Wear:
1.
Wear the provided harness without twisted bands, with
the hanger on your right side.
(1) Hanger
Balance the Unit:
1.
Hook your machine to the hanger.
2.
Adjust the bands of the harness to have the blade
parallel to the ground when standing in your normal
working position to provide you most effectiveness
and comfort on operating the machine.
3.
In order to prevent the hanger position to change
during operation, turn up the extra part of the band
from the buckle.
4.
When correctly adjusted, check the correct working
of the harnesses' QUICK RELEASE.
