FarmBoy
®
Agricultural Reaper (Baffle Type)
FB-BC-8642 / 8652
FB-BC4-8636
: www.kisankraft.com
: info@kisankraft.com
: +91.80.22178200
Page 8 of 36
Starting the Engine
1.
Keep bystanders and animals at least 50feet
(15m) away from the operating point. If you are
approached, immediately stop the engine.
2.
The product is equipped with a centrifugal clutch
mechanism, so the cutting attachment begins to
rotate as soon as the engine is started by putting
the throttle into the start position. When starting
the engine, place the product onto the ground in
a flat clear area and hold it firmly in place so as
to ensure that neither the cutting part nor the
throttle come into contact with any obstacle
when the engine start.
WARNING:
Never place the throttle into the
high speed position when starting the engine.
3.
After starting the engine, check to make sure
that the cutting attachment stops rotating when
the throttle is moved fully back to its original
position. If it continues to rotate even after the
throttle has been moved fully back, turn off the
engine and take the unit to your authorized
servicing dealer for repair.
Using the Product
IMPORTANT
Cut only materials recommended by the manufacturer. And use only for tasks explained in
the manual.
1.
Grip the handles firmly with both hands using your whole
hand. Place your feet slightly apart (slightly further apart
than the width of your shoulders) so that your weight is
distributed evenly across both legs, and always be sure to
maintain a steady, even posture while working.
2.
Keep cutting attachment below waist level.
3.
Maintain the speed of the engine at the level required to
perform cutting work, and never raise the speed of the
engine above the level necessary.
4.
If the unit start to shake or vibrate, turn off the engine and
check the whole unit. Do not use it until the trouble has
been properly corrected.
5.
Keep all parts of your body away from rotating cutting
attachment and hot surfaces.
FarmBoy
®
Agricultural Reaper (Baffle Type)
FB-BC-8642 / 8652
FB-BC4-8636
: www.kisankraft.com
: info@kisankraft.com
: +91.80.22178200
Page 29 of 36
Parts Diagram & List
– Body (FB-BC-8642/52)
Sl No.
Part Name
Qty
1.
Housing
1
2.
Bolt M5 x 25
8
3.
Bolt M5 x 12
2
4.
Bolt M6 x 25
1
5.
Nut M6
1
6.
Hanger Assy
7.
Right handle
1
8.
Bracket Assy
1
9.
Bolt M6 x 35
2
10. Plate
1
11. Aluminium pole
1
12. Gearbox Assy
1
13. 3- Teeth blade
1
14. Nylon head
1
15. Blade
1
16. Bolt M4 x 10
3
17. Debris guard
1
18. Driving shaft
1
19. Shaft sleeve
6
20. Left handle
1
