KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-300D / 307D / 350D / 357D
KK-CRT-550D
: +91.80. 6835 7800
Page 32 of 80
Symptom
Cause
Remedy
Oil leakage of the
fork shaft of the
reversing shaft
Malfunction of O-shaped ring
Replace with O-shaped ring
∮
1.2×1.8
Oil leakage of the
fork shaft of the
clutch
Malfunction of O-shaped ring
Replace with O-shaped ring
∮
1.2×1.8
Oil leakage of the
shift shaft
Malfunction of O-shaped ring
Replace with O-shaped ring
∮
1.2×1.8
Oil leakage of the
flange
connection
The bolts are loose there
Screw the bolts tight
The vulcanized paper board is
damaged there
Replace the paper board
Leakage of the
gear-box body
The gear-box body has tiny
hidden holes
Re-welding or brush base paint
to stop the leaking
Oil leakage of the
fork shaft of the
clutch
Malfunction of O-shaped ring
Replace with O-shaped ring
∮
1.2×1.8
Oil leakage of the
shift shaft
Malfunction of O-shaped ring
Replace with O-shaped ring
∮
1.2×1.8
Oil leakage of the
flange
connection
The bolts are loose there
Screw the bolts tight
The
vulcanized
paper
is
damaged
Replace the paper board
Leakage of the
gear-box body
The gear-box body has tiny
hidden holes
Re-welding or brush base paint
to stop the leaking
Troubleshooting of Traveling Mechanism
Symptom
Cause
Remedy
Too much noise from
the gear
Excess abrasion or error
repairing of the gear
Re-fix
and
re-adjust
or
replace the gear
Gears are blocked to
standstill when running
Error in fixing
Re-fix the gears.
Overheating
No enough lubricant in the
box
Re-fill oil according to the
request
The lateral clearance of
gear is too small
Re-fix
The axial clearance is too
small
Re-adjust the clearance value
Oil leakage of the gear-
box connection
The connection bolt is loose
Screw the bolt tight
The seal gasket is damaged
Replace with lip-shaped oil
seal B45628
The oil leakage of the
output shaft casing
The lip-shaped oil seal there
is damaged
Replace with lip-shaped oil
seal B45628
