KisanKraft
®
Agricultural Inter-Cultivator
KK-IC-100P / 105P /200P / 205P / 207P / 215P
: +91.80. 6835 7800
Page 30 of 112
Maintenance
Keeping the inter-cultivator in good condition will prolong the inter-cultivator's life, and help it Arrive optimum
performance whenever you wish to do intercultural/weeding operations in your field.
To help you properly care for the inter-cultivator, the following pages include a maintenance schedule,
routine inspection procedures, and simple maintenance procedures using basic hand tools. Other service
tasks that are more difficult, or require special tools, are best handled by professionals, and are normally
performed by a qualified mechanic.
1. Brake-in
New machine, or machine after big service need first work without load for one hour. And then work under
low load for 5 hours. And drain out oil and add clean oil. Next add fresh Petrol to clean. And then add clean
oil, and then brake-in four hours. Then machine can work rightly.
2. Maintenance
2.1. Good maintenance is your responsibility. Poor maintenance means troubles.
•
Follow good shop practices
•
Keep service area clean and dry
•
Be sure electrical outlets and tools are properly grounded.
•
Use adequate light for the job at hand.
2.2. Make sure the engine is off before you begin any maintenance or repairs. This will eliminate several
potential hazards:
•
Carbon monoxide poisoning from engine exhaust.
•
Be sure there is adequate ventilation whenever you operate the engine
•
Never operate the engine in a closed building.
•
Let the engine and exhaust system cool before touching
•
Do not run the engine unless instructed to do so.
2.3. Read the instructions before you begin, and make sure you have tile tools and skills required
2.4. To reduce the possibility of fire or explosion, be careful when working around Petrol Use only a
nonflammable solvent, not petrol, to clean parts. Keep sparks and flames away from all fuel-related parts.
2.5. Frequently check inter-cultivator tines. They should be free of nicks and cracks and securely fastened in
place
2.6. Periodically lighten all bolts, nuts, screw, and check that all pills ate properly installed to make certain
unit is safe to operate.
2.7. Where replacement parts are necessary for periodic maintenance and servicing, use only new, original
replacement parts or their equivalents for repair and replacement to restore your equipment to original
specifications.
2.8. The manufacturer and/or distributor will not be responsible for injuries or damages caused by use of
unapproved parts and/or accessories.
2.9. A first aid kit should be kept readily accessible while performing maintenance on this equipment.
