KisanKraft
®
PETROL ENGINE - 4 STROKE
: +91.80. 6835 7800
Page 84 of 112
•
Wash the element in solution of household detergent and warm water, then rinse
thoroughly, or wash in nonflammable or high flash point solvent. Allow the
element to dry thoroughly
1)
Butterfly nut
2)
Air cleaner cover
3)
Butterfly nut
4)
Paper element
5)
Foam element
6)
Seal washer
7)
Silencer plate
WARNING:
Do not run the engine without air cleaner.
DANGER
Using Petrol or flammable solvent to clean the filter element can cause a fire or explosion.
CAUTION
:
Do not run the engine without air cleaner core, otherwise dust and/or other foreign matters
may get into the engine through carburetor, and results in rapid engine worn-out.
Starting The Engine
•
Turn the fuel valve to ON position, unscrew the drain plug on carburetor bottom,
and fasten the drain plug until oil spills out.
•
Pull the choke rod to the CLOSE position. Adjust throttle to proper position. Pull
the starter grip lightly until resistance is felt, then pull it rapidly
(1) Fuel Valve
(2) Start Level
(3) Drain Plug
NOTE
:
•
Do not allow the starter grip to snap back against the engine. Return it gently to
prevent damage to the starter.
