MASTER CODE
The Master Code can:
Open the lock
Change the Master Code
Set / Change / Delete the Sub‐Master and User Code
Select between Private and Public Functions
Activate/deactivate Technician Code
SUB‐MASTER CODE
The Sub‐Master Code can:
Open the lock
Change the Sub‐Master
Set / Change / Delete / the User Code
USER CODE
The User Code can:
Open the lock
Change the User Code
•
Blue LED = Code accepted
•
Red LED = Code rejected
TECHNICIAN CODE
The Technician Code can:
Open the lock
A code cannot be programmed into more than one level.
LOST CODE PROCEDURE
Note: The procedure requires the door to be open
Remove the rear‐fixing bolt and swing the lock over the edge of the door to reveal the battery compartment.
Remove one battery.
Press and hold the 1 button, replace the battery, the Blue LED will flash twice, release the 1 button. Within three seconds press the 1 button three times. The
Blue LED will flash twice and the lock will have reverted to the factory Master Code 11335577 and all other stored settings will be erased.
PENALTY TIME
Entering three incorrect codes will cause the lock to shutdown for 10 seconds.
BATTERY POWER
The KitLock should provide well in excess of 15,000 openings, of 4 seconds each, from 2 x AAA 1.5v cells.
LOW BATTERY
When the battery power is low the
•
Red LED will flash 3 times before the
•
Blue LED lights, accepting the code. Fit new batteries as soon as this happens.
The lock will operate for 100 times with low battery.
