IF YOU NEED TO CALIBRATE
Joysticks
First and foremost is calibrating your
joysticks. Calibrating the joysticks does two
things for you. One, it allows you to properly
align the joysticks for maximum range of
control and sensitivity. Two, it allows you to
decide if you want to fly in Mode 1 or Mode
2. Remember: Which mode you pick
determines what direction you need to hold
the joysticks during the calibration.
To Change to Mode 2 and Calibrate Sticks
1. Disconnected board from battery
2. Turn off Controller
3. Place both joysticks in upper-most left
position
4. While holding joysticks in position, turn on
controller. The light on the controller should
start flashing
5. Roll each joystick around in the clockwise
fashion for calibration.
6. Press down on the right aileron trim button
(farthest right trim button on the controller)
until the controller light starts blinking red.
7. Turn off the controller.
Lego Drone Kit Instructions
