Mini Lego Drone Kit Instructions
Solder one motor (black and white wires) to the
upper right
motor location on the board. You
will see a positive (M+) and negative (M-)
terminal. Solder the
BLACK
wire to the (M-)
terminal and the
WHITE
wire to the (M+)
terminal as shown. Repeat this step for the
bottom left motor arm.
(-)
(+)
Solder another motor (blue and red wires) to
the
upper left
location on the board. You will
see a positive (M+) and negative (M-) terminal.
Solder the
BLUE
wire to the (M-) terminal and
the
RED
wire to the (M+) terminal as shown.
Repeat this step for the bottom right motor arm.
(-)
(+)
