The end of the battery has a male
JST type connector that fits with the
female JST type connector on the
receiver board. They fit together as
shown. When you plug the battery
into the receiver board, the LEDs
located on the board will light up.
Mini Paper Drone Kit Instructions
Turning On
1. Plug in your battery to your
receiver board.
2. Set on a level surface to ensure
internal accelerometer is level.
3. Turn on controller. You will hear a
“beep” when the controller and
receiver are paired.
4. Test joysticks to make each
propeller rotate.
5. Slowly engage all 4 motors and
work on controlling movement
and lift.
6. FLY!
7. Watch out for fast spinning
propeller blades, they’re sharp!
