4-9
3.
To remove a burner ignitor:
a) Remove the grates, the griddle (if in-
stalled), and the sear plates.
b) Remove the control panel and the spark
module (see pages 4-2 and 4-3 for the
procedures).
c) Remove the two 5/8
″
hex nuts from the
front cover, pull the top of the cover
forward, and remove it.
d) Remove the screw from the ignitor
bracket and collector box. NOTE: Hold
the collector box while removing the
screw since the screw secures both the
ignitor and the collector box.
5/8
″
Nuts
Front Cover
e) Disconnect the burner ignitor wire con-
nector from the spark module.
Burner Ignitor
Ignitor Wires
Continued on the next page.
Bracket &
Collector Box
Screw
Collector Box
Bracket &
Collector
Box Screw