12
Preparing the Food Processor for Use
4. The 2-piece cone offers two sizes;
choose the right size for the fruit
you are juicing. Use the outer cone
for grapefruit, oranges and other
large fruits. Remove the outer cone
to reveal a smaller inner cone that’s
perfect for lemons and limes.
5. Open the lid and place the cone
inside the strainer basket over
the power shaft. It may be
necessary to rotate the cone until
it falls into place.
6. Halve the fruit to be juiced.
7. Place fruit half on cone.
8. Close the lid of the strainer basket.
Hold the lever arm down firmly
with an open palm to maintain
even pressure. Operate the citrus
press only when the lever arm is in
the down position, holding the
fruit on the cone.
NOTE:
Use of the citrus press
without the clip-on lever arm is not
recommended. If you do use it
without the lever arm, remove the
lever arm from the basket (see
Step 13).
9. Operate the citrus press by
pressing the On Button or the
Pulse Button.
10. When juice is fully extracted, Press
the Off Button.
NOTE:
Do not exceed the maximum
liquid level line on the work bowl, or
juice will leak from the bowl.
11. Unlock the strainer basket by
turning it clockwise. Remove
juiced fruit, cone, and strainer
basket from the work bowl.
12. Remove the work bowl from Food
Processor and pour juice into
desired container.
13. To detach the clip-on lever arm
from the strainer basket for
thorough cleaning, pull the clip at
the bottom of the basket away
from the basket side and remove
the lever-arm from the basket.
14. When reattaching the lever arm
to the strainer basket, make sure
the tabs on the clip snap securely
into a pair of holes in the bottom
of the basket.