background image

8  

|  STAND MIXER SAFETY

ELECTRICAL REQUIREMENTS

STAND MIXER SAFETY

Electrical Shock Hazard

Plug into an earthed outlet.

Do not remove earth prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these 
instructions can result in 
death, fire, or electrical shock.

Voltage:

 220-240 V~

Frequency:

 50-60 Hz

Wattage:

 300 W

NOTE:

 To reduce the risk of electrical 

shock, this plug will fit in an outlet only 
one way. If the plug does not fit in the 
outlet, contact a qualified electrician. Do 
not modify the plug in any way.

A short power supply cord is supplied to 
reduce the risk resulting from becoming 
entangled in or tripping over a longer 
cord.

If an extension cord is used:

•   The marked electrical rating of the cord 

set or extension cord should be at least 
as great as the electrical rating of the 
appliance.

•   The cord should be arranged so that it 

will not drape over the countertop or 
tabletop where it can be pulled on by 
children or tripped over unintentionally.

ELECTRICAL EQUIPMENT WASTE DISPOSAL

Disposal of packing material 

The packing material is 100% recyclable 
and is marked with the recycle symbol 

. The various parts of the packing 

must therefore be disposed of 
responsibly and in full compliance  
with local authority regulations 
governing waste disposal. 

Scrapping the product 

- By ensuring this product is disposed 
of correctly, you will help prevent 
potential negative consequences for 
the environment and human health, 
which could otherwise be caused by 
inappropriate waste handling of this 
product. 

 
- The 

 symbol on the product or 

documentation indicates that it may not 
be treated like normal household waste, 
but must be disposed of in accordance 
with current local legislation and 
regulations for this type of waste.

W11256121A.indd   8

14/06/2018   15:29:23

Summary of Contents for 5KSM175PSRBK0






















Reviews: