EN
7
PRODUCT ASSEMBLY (CONTINUED)
ASSEMBLING THE ATTACHMENT TO THE STAND MIXER
1.
Turn the Stand Mixer OFF(0) and unplug.
2.
For Stand Mixers with a hinged attachment hub cover:
Flip up to open.
For Stand Mixers with a removable attachment hub cover:
Turn the attachment knob
counterclockwise to remove attachment hub cover.
3.
Remove the Stand Mixer attachment hub cover.
4.
Insert the attachment shaft Housing into the attachment hub.
5.
Tighten the Stand Mixer attachment hub knob until the attachment is completely secured
to the Stand Mixer.
TIP:
Place the large bowl under the Discharge opening or the Strainer Cone to catch
ground or strained food and place a smaller bowl under the open end to catch food waste.
WARNING
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
6.
Plug the Stand Mixer into an earthed outlet.
PRODUCT USAGE
USING WITH THE FOOD GRINDER ATTACHMENT
WARNING
Rotating Blade Hazard
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in amputation or cuts.
1.
Cut food into small strips or pieces sized to fit into the feed tube.
2.
Turn the Stand Mixer to Speed 4 and feed food into the feed tube using the Food Pusher.
USING WITH THE FRUIT/VEGETABLE STRAINER ATTACHMENT
1.
Cut food into pieces that will fit in the Feed Tube.
2.
Turn the Stand Mixer to Speed 4 and feed food into the Feed Tube using the Food Pusher.
