background image

20  

|  TROUBLESHOOTING

TROUBLESHOOTING

If your Stand Mixer should malfunction or 

fail to operate while using the Pasta Press 

attachment, please check the following:

1. 

Did you use the correct speed for 

the pasta plate as suggested in the 

“Choosing the right pasta plate” chart?

2. 

Did you assemble and attach the Pasta 

Press attachment properly as shown in 

the “Using the Pasta Press” section?

3. 

Did you follow the usage instructions 

as described in the “Using the Pasta 

Press” section?

4. 

Is your dough prepared according to 

the recipe?

5. 

Is the Stand Mixer plugged in? 

6. 

Is the fuse in the circuit to the Stand 

Mixer in working order? If you have a 

circuit breaker box, be sure the circuit 

is closed�

7. 

Turn off the Stand Mixer for 10-15 

seconds, then turn it back on� If the 

Stand Mixer still does not start, allow  

it to cool for 30 minutes before turning 

it back on�

If the problem is not due to one of the 

above items, see the “Warranty and 

service” section�
Do not return the Pasta Press attachment 

or the Stand Mixer to the retailer, as they 

do not provide service�

W10829435B_01_EN_v01.indd   20

3/4/16   3:08 PM

Summary of Contents for 5KSMPEXTA























Reviews: