Make Gas Connection
NOTE: If grill is to be converted to Natural gas, follow
instructions in the “Gas Conversions” section.
20 lb LP Gas Fuel Tank
A
C
To Connect the 20 lb LP Gas Fuel Tank
:
5. Slide the tank tray with the 20lb LP gas fuel tank back into
the cabinet and lock the locking bracket.
B
A. Locking screw
B. Bottom collar
C. Mounting hole
To Connect the 20 lb LP Gas Fuel Tank
:
1. Check that the 20 lb LP gas fuel tank is in the “Off”
position. If not, turn the valve clockwise until it stops.
2. Check that the 20 lb LP gas fuel tank valve has the proper
type-1 external male thread connections per ANSI Z21.81.
3. Check that the burner control knobs are in the “Off”
position.
4. Remove any debris and inspect the valve connections,
port and gas pressure regulator/hose assembly for
LP Gas:
IMPORTANT:
A 20 lb LP gas fuel tank must be purchased
separately.
IMPORTANT:
The gas pressure regulator/hose assembly
supplied with the grill must be used. Replacement gas pressure
regulator/hose assembly specific to your model is available from
port, and gas pressure regulator/hose assembly for
damage.
NOTE:
Always keep the LP cylinder at 90
°
(upright)
orientation to provide vapor withdrawal.
regulator/hose assembly specific to your model is available from
your outdoor grill dealer. Please call customer service at 1-877-
373-2301.
Door Style Tank Tray
1. Open cabinet doors.
2. Slide the tank tray locking bracket counterclockwise 90º
and pull out the tray.
5. Using your hand, turn the gas pressure regulator/hose
assembly clockwise to connect to the 20 lb LP gas fuel
tank as shown.
Hand tighten only. Use of a wrench could damage the
quick coupling nut.
A. Tank tray locking bracket
A
3. Place the 20 lb LP gas fuel tank bottom collar into the
mounting hole in the tank tray.
4. Tighten the locking screw against the bottom collar of
the 20 lb LP gas fuel tank to secure.
A. Gas pressure regulator/hose assembly
B. 20 lb LP gas fuel tank
A
B
16
