Clean the exterior of the burner with a wire brush.
Clear any clogged burner ports with a straightened
paper clip.
Do not use a toothpick as it may break off and clog
IMPORTANT:
The grease cup should only be removed when grill
BURNERS
Cleaning Method:
Cleaning Method:
SEARING SIDE BURNERS
GREASE CUP
Clean the exterior of the searing side burner with a wire brush
.
Do not use a toothpick as it may break off and clog
the port.
Check and clean burner/venturi tubes.
1. Remove grill grates and flame tamers.
2. Remove the 2 screws and cotter pin that hold the burner in
place. Remove gas burner from the grill.
g
p
y
g
is completely cool.
The grease cup collects grease and food particles that fall through
the grill. Clean often to avoid grease buildup.
Cleaning Method:
Remove the grease cup.
Wipe excess grease with mild detergent and warm water
using paper towels.
Rinse and dry thoroughly.
R l
Replace grease cup.
IMPORTANT:
To avoid damage to knobs or flange area around
knobs, do not use steel wool, abrasive cleaners, or oven cleaner.
Do not soak knobs.
Cleaning Method:
KNOBS AND FLANGE AREA AROUND KNOBS
Mild detergent, a soft cloth and warm water.
Rinse and dry.
IMPORTANT:
To avoid damage to control panel graphics, do
not use steel wool, abrasive cleaners or oven cleaner.
Do not spray cleaner directly onto panel.
Cleaning Method:
Cl
d th b
l b l
tl
bbi
CONTROL PANEL GRAPHICS
A Screws
B
A
3. Use a flashlight to inspect into the burner through the burner
inlet to ensure there is no blockage. If any obstruction is seen,
use a metal coat hanger that has been straightened to clear
them.
4. After inspecting the inside of burner for blockage, reassemble
burner by sliding the middle tube of the gas burner over the gas
Clean around the burner labels gently; scrubbing may
remove printing.
Mild detergent, soft cloth and warm water.
Rinse and dry.
A. Screws
B. Cotter Clip
orifice.
A
A. Burner/orifice connection
5. Reattach gas burner using screw.
30
