KitchenAid ARCHITECT II KERS308X Use And Care Manual Download

Page: 32 / 36

Before You Call

Solutions to common problems

Oven light does not work.

Cannot move appliance easily.

Appliance must be accessible for

service.

Appliance is not level.

Before you call for service, review the following list. It may save you time & expense. Possible solutions to these problems

are provided with the problem listed:

Entire appliance does not operate.

Problem

Solution

Poor baking results.

Many factors affect baking results. Make sure the proper oven rack position is

used. Center food in the oven and space pans to allow air to circulate. Allow

the oven to preheat to the set temperature before placing food in the oven. Try

adjusting the recipe's recommended temperature or baking time. If you feel the

oven is too hot or cool, see

Adjusting oven temperature

in Setting Oven

Controls section.

Be sure floor is level, strong & stable enough to adequately support range.
If floor is sagging or sloping, contact a carpenter to correct the situation.
Poor installation. Place oven rack in center of oven. Place a level on the oven

rack. Adjust leveling legs at base of appliance until the rack is level.

Kitchen cabinet alignment may make range appear not level. Be sure

cabinets are square & have sufficient room for appliance clearance.

Cabinets not square or are built in too tightly. Contact builder or installer to

make appliance accessible.

Carpet interferes with appliance. Provide sufficient space so appliance can

be lifted over carpet.

Make sure power cord is plugged properly into outlet.
Electrical power outage. Check house lights to be sure. Call your local

electric company for service outage information.

Service wiring is not complete. See

Assistance or Service

section of

manual for assistance contact information.

The time of day is not set. The time of day must first be set in order to

operate the oven. See Setting clock in

Setting Oven

Controls section.

Be sure the oven controls are set properly for the desired function. See

Setting Oven Controls section and review instructions for the desired cooking

function in this manual or see Entire appliance does not operate in this

checklist.

Incorrect surface control setting. Adjust power level setting.

Be sure the correct surface control knob is turned ON for element needed.
Lightweight or warped pans used. Use only flat, evenly balanced, medium or

heavyweight cookware. Flat pans heat better than warped pans. Cookware

materials and weight of the material affect heating. Heavy & medium-weight

pans heat evenly. Because lightweight pans heat unevenly, foods may burn

easily.

Be sure the oven light is secure in the socket. Also see

Replacing oven light

in the Care & Cleaning section.

Oven portion of appliance does not

operate.

Surface element is too hot or not hot

enough.

Surface element does not heat or does

not heat evenly.

Summary of Contents for ARCHITECT II KERS308X





































Search results

Summary of Contents for ARCHITECT II KERS308X

Reviews:

Related manuals for ARCHITECT II KERS308X

Brands by name

Popular brands

KitchenAid ARCHITECT II KERS308X, Use And Care Manual

Search results

Summary of Contents for ARCHITECT II KERS308X

Reviews:

Related manuals for ARCHITECT II KERS308X

Brands by name

Popular brands