KitchenAid ARCHITECT II KERS308X Use And Care Manual Download

Page: 8 / 36

Cookware material types

The cookware material determines how evenly and quickly

heat is transferred from the surface element to the pan

bottom. The most popular materials available are:

Aluminum

- Excellent heat conductor. Some types of food

will cause it to darken (Anodized aluminum cookware

resists staining & pitting). If aluminum pans slide across

the ceramic cooktop, they may leave metal marks which

will resemble scratches. Remove these marks immediately.

Copper

- Excellent heat conductor but discolors easily.

May leave metal marks on ceramic glass (see Aluminum).

Stainless

- Slow heat conductor with uneven cooking

results. Is durable, easy to clean and resists staining.

Cast Iron

- A slow heat conductor however will retain heat

very well. Cooks evenly once cooking temperature is

reached. Not recommended for use on ceramic cooktops.

Porcelain-

enamel on metal - Heating characteristics will

vary depending on base material. Porcelain-enamel coating

must be smooth to avoid scratching ceramic cooktops.

Glass

- Slow heat conductor. Not recommended for ceramic

cooktop surfaces because it may scratch the glass.

Important note:

Do not place empty aluminum, glass or porcelain-

enamel coated cookware on the ceramic cooktop!

The

melting point of cookware made with these materials may

be reached quickly especially if left empty and they may

bond to the ceramic cooktop. If the cookware melts it will

damage the cooktop! Be sure to follow all the cookware

manufacturers suggestions when using any type of

cookware on the ceramic cooktop.

Before Setting Surface Controls

Using proper cookware

The size and type of

cookware used will

influence the radiant

element power level

setting needed for

best cooking results.

Be sure to follow the

recommendations for

using proper

cookware as

illustrated in both

Figs. 1 & 2.

Fig. 1

Flat bottom and straight

sides.

Tight fitting lids.
Weight of handle does

not tilt pan. Pan is well

balanced.

Pan sizes match the

amount of food to be

prepared and the size of

the surface element.

Made of material that

conducts heat well.

Easy to clean.
Always match pot

diameter to element

size.

Fig. 2

Curved and warped pans.

Cookware larger than

cooking area marked on

cooktop by more than one-

half inch or 12mm.

Heavy handle tilts pan.

Check for flatness by rotating a ruler across the bottom of

the cookware (See Fig. 1). Cookware should have flat

bottoms that make good contact with the entire surface

heating element (See Fig. 2). For more detailed information

about the ceramic cooktop see Cooktop maintenance and

Cooktop cleaning in the Care & Cleaning section.

Pan is smaller than the

heating area marked on

cooktop.

Summary of Contents for ARCHITECT II KERS308X





































Search results

Summary of Contents for ARCHITECT II KERS308X

Reviews:

Related manuals for ARCHITECT II KERS308X

Brands by name

Popular brands

KitchenAid ARCHITECT II KERS308X, Use And Care Manual

Search results

Summary of Contents for ARCHITECT II KERS308X

Reviews:

Related manuals for ARCHITECT II KERS308X

Brands by name

Popular brands